Maxstar Welder

Plasma Cutting System (3/8" Cu


	Image for reference only Actual item may look different Click on image for larger view

Quantity:

Input voltages 120-240 V, 1-PH, 50/60 Hz
Input current @ 3.8 kW 120-240 V, 1-PH, 25-18.8 A
Output current 15-30 A
Rated output voltage 125 VDC
Duty cycle @ 40 C (104 F) 35%, 240 V
20%, 120 V
Open circuit voltage (OCV) 256 VDC
Dimensions with handles 356 mm (14.0") D; 168 mm (6.6") W; 305 mm (12.0") H
Weight w/ 4,5 m (15') torch CSA: 9.7 kg (21.4 lbs)
CE, CCC: 9.5 kg (21 lbs)
Gas Supply Clean, dry, oil-free air or nitrogen
Recommended gas inlet
flow rate / pressure 113.3 l/min (4 scfm) at 5.5 bar (80 psi)
Input power cable length 3 m (10')
Power supply type Inverter - IGBT
Engine drive requirement 5.5 kW for full 30 A output
Operating data
Capacity Thickness Cut speed
Cutting
Recommended 10 mm (3/8") 500 mm/min (20 ipm)
12 mm (1/2") 250 mm/min (10 ipm)
Severance 16 mm (5/8") 125 mm/min (5 ipm)
Cutting with 120 V input power
Use FineCut nozzle and deflector for cutting at 120 V input power. When operating at the maximum recommended output of 25 A, the cut capacities are:
6 mm (1/4") at 482 mm/min (19 ipm)
10 mm (3/8") at 203 mm/min (8 ipm)
12 mm (1/2") at 76 mm/min (3 ipm)
System includes
Power supply, 4,5 m (15') Duramax LT hand torch with standard consumables, 4,5 m (15') work clamp
240 V/20 A plug with adapters for 120 V/15 A and 240 V/20 A circuits (CSA models)

* Please call for pricing and availability.